Specifications

Refrigerated Aluminum Specs Diagram
LENGTH DIMENSIONS
Notes:
4.) O/H Door Dimensions Are For A Single Insulated Door. Subtract 1" For Double Insulated Doors.
5.) Panel Door Dimensions Are For 3" Thick Foam Doors. Subtract 1" for 4" Foam Doors, 2" For 5" Foam doors.
NOMINAL LENGTH 10 12 14 16 18 20 22 24 26 28
"K" 10' 5-5/8" 12' 5-5/8" 14' 5-5/8" 16' 5-5/8" 18' 5-5/8" 20' 5-5/8" 22' 5-5/8" 24' 5-5/8" 26' 5-5/8" 28' 5-5/8"
"L" - O/H 4 9' 7" 11' 7" 13' 7" 15' 7" 17' 7" 19' 7" 21' 7" 23' 7" 25' 7" 27' 7"
"L" - PANEL DOORS 5 9' 10" 11' 10" 13' 10" 15' 10" 17' 10" 19' 10" 21' 10" 23' 10" 25' 10" 27' 10"
WIDTH DIMENSIONS
1.) Interior Width Dimension Is From Scuff To Scuff.
EXTERIOR BODY WIDTH "A" "B" 1
1.38"FOAM 3" FOAM 4" FOAM 5" FOAM
90 90" 86-3/16" 83-3/16" 81-3/16" 79-3/16"
96 96" 92-3/16" 89-3/16" 87-3/16" 85-3/16"
102 102" 98-3/16" 95-3/16" 93-3/16" 91-3/16"
"F" - REAR DOOR OPENING HEIGHT 6
6.) Rear Door Opening Height Is Based On Standard 4" Floor Foam. Subtract 1" for 5" Floor Foam. Add 3-3/8" For Foam Between Sills.
BODY HEIGHT OVERHEAD DOORS SWING PANEL DOORS
WHITING TEMPGUARD TODCO 1.12 POLARGUARD WHITING COLDSAVER TODCO 2.50 POLARGUARD
3", 4" AND 5" CEILING FOAM
3" AND 4" CEILING FOAM 5" CEILING FOAM 3" AND 4" CEILING FOAM 5" CEILING FOAM
79 64 -3/8" 63-3/8" 63-3/8" 62-3/8" 69-5/8"
85 70-3/8" 69-3/8" 69-3/8" 68-3/8" 75-5/8"
91 76-3/8" 75-3/8" 75-3/8" 74-3/8" 81-5/8"
97 82-3/8" 81-3/8" 81-3/8" 80-3/8" 87-3/8"
103 88-3/8" 87-3/8" 87-3/8" 86-3/8" 93-5/8"
STANDARD SIDE DOOR LOCATIONS
Notes:
8.) Foremost Location Of Side Door is 13-1/16" From Inside Front Wall.
9.) Door Can Be Moved Fore and Aft of Std. Location on 2" Increments Only.
10.) Door Location is Based On 4" Of Foam In Front Wall.
BODY LENGTH 10 12 14 16 18 20 22 24 26 28
J 29-1/16" 61-1/16"
HEIGHT DIMENSIONS
2.) Exterior Height Does Not Include Longitudinales
3.) Interior Height Is Based On Standard 4" Floor Foam. Subtract 1" for 5" Floor Foam. Add 3-9/16" For Foam Between Sills.
BODY HEIGHT "C" 2 "D" 3
3" FOAM 4" FOAM 5" Foam
79 85-3/8" 74.00" 73.00" 72.00"
85 91-3/8" 80.00" 79.00" 78.00"
91 97-3/8" 86.00" 85.00" 84.00"
97 103-3/8" 92.00" 91.00" 90.00"
103 109-3/8" 98.00" 97.00" 96.00"
SIDE DOOR DIMENSIONS
"H" - SIDE DOOR HEIGHT "G" SIDE DOOR WIDTH
SIDE DOOR BODY HEIGHT
79 85 91 97 103
STD. HEIGHT 66-7/8" 72-7/8" 72-7/8" 72-7/8" 72-7/8" 36-1/16"
FULL HEIGHT 66-7/8" 72-7/8" 78-7/8" 84-7/8" 90-7/8" 36-1/16"
"E" - REAR DOOR OPENING WIDTH
7.) Side Wall Foam Thickness Does Not Affect Swing Panel Door Opening Width.
EXTERIOR BODY WIDTH O/H DOOR SWING PANEL DOORS 7
1.38", 3", 4" SIDE FOAM 5" SIDE FOAM 2, 3, OR 4 - PANEL FULL OPENING 1 OR 2 -PANEL NARROW OPENING
90 76" 74" 82" 43-3/4"
96 82" 80" 88" 43-3/4"
102 88" 86" 94" 43-3/4"
CALCULATED WEIGHT CHART
BODY HEIGHT BODY LENGTH Body Weight Includes: Base Body, O/H Rear Door, D.O.T. Underide, Mud Flaps, Lighting Per FMVSS 108, Mounting Kit, Kemlite Linear Front, Sides and Ceiling, Steel Reinforcement For One-piece Reefer Unit, 3" Foam Sides And Ceiling, 4" Foam Front And Floor, Smooth Extruded Aluminum Hat Floor, 4" Jr. I-Beam Longitudinales. Weight Tolerance = ± 3%
10 12 14 16 18 20 22 24 26 28
GVSR79 2440 2685 2944 3194 3456 3707 3967 4221 4482 4732
GVSR85 2505 2754 3019 3273 3539 3796 4059 4318 4584 4839
GVSR91 2571 2824 3092 3352 3613 3884 4153 4418 4691 4947
GVSR97 2635 2883 3166 3430 3705 3971 4244 4514 4789 5053
GVSR103 ---- ---- 3239 3510 3789 4057 4338 4611 4891 5160

DIMENSIONAL KEY

A= Overall Width
B= Interior Width
C = Exterior Height
D = Interior Height
E = Rear Door Opening Width
F = Rear Door Opening Height
G = Side Door Opening Height
H = Standard Side Door Opening Height
J = Leading Edge Of Side Door To Inside Front of Body
K = Exterior Length of Body
L = Inside Front Liner To Inside Rear Door Panel
M = Bottom Of Evaporator Unit To Floor
N = Bottom Of Condenser Unit To Bottom of of Longitudinal (4" I-Beam)
O = Depth of Refrigeration Unit Condenser
P = Depth of Refrigeration Unit Evaporator

Note:

All Dimensions Weights and Measurements Specified Herein Are Subject to Morgan's Manufacturing Tolerances, may change without Notice, And May Vary Depending On Options Selected. Please Contact Morgan For Measurements For Your Particular Truck Body And Chassis Specifications.

Website Feedback